Product Description
Shadow Spirit Taurus X8 Pro Max O4 Pro
Model: Shadow Spirit Taurus X8 Pro Max HD O4 Pro 8S BNF
Flight controller: BLITZ H7 Pro FC
ESC: BLITZ E80 Single ESC
Image transmission: DJl O4 Pro Air Unit (Sky-based)
Motor: XING2 3616 760KV
Propeller: HQprop 11*7.5*3
Frame type: H-type (cinema projector)
Motor diagonal distance: 610mm
Dimensions (L*W*H): 587*411*73 (to the gimbal) ±2mm / 587*411*65 (to the top plate) ±2mm
Weight: 3855±20g (including propeller/nut/antenna/anti-slip pad) (excluding camera kit)
Takeoff weight: 6160±20g (including 8S 5600mAh batteries *2)
Maximum horizontal flight speed: 170 km/h
Maximum takeoff altitude: 7000m
Maximum hovering time: Approximately 14 minutes (Lithium-ion battery 8S 5600mAh battery * 2, no load)
Cruise time with load: Approximately 6.1 minutes (2KG load, 80km/h cruise) | Approximately 5.6 minutes (3KG load, 80km/h cruise)
Load hovering time: Approximately 9.3 minutes (2KG load) | Approximately 9.1 minutes (3KG load)
Recommended load: not exceeding 3KG
Maximum wind resistance level: Level 8
Operating ambient temperature: -10℃—40℃
Number of antennas: dual antennas
GNSS：GPS+SBAS+Galileo+QZSS+Glonass
DJI O4 Air Unit Pro Sky Unit
Overview of Imaging Systems:
Image sensor: 1/1.3 inch
Lens angle: 155°
ISO range: 100-25600
Recording resolution: up to 4K@120fps
Video format: MP4, maximum bitrate 130Mbps
Color Mode: Normal/D-Log M
Electronic stabilization: RockSteady 3.0+ (Super Stabilization) / Stabilization function off (Gyroflow supported)
Real-time image transmission: 1080P@100fps
Communication parameters:
Operating frequency bands: 5.170-5.250GHz & 5.725-5.850GHz (frequency bands and power vary depending on local regulations)
Transmit power: 5.1GHz < 23dBm (CE) / 5.8GHz < 33dBm (FCC) / < 14dBm (CE) / < 30dBm (SRRC)
Communication bandwidth: Maximum 60MHz
Antenna: Dual antennas (two transmit and two receive)
Storage and compatibility:
Onboard memory: 4GB
Supported memory card type: microSD, maximum 512GB
Compatible with flight goggles and remote controllers: Flight Goggles 3/N3 + FPV Remote Controller 3; Goggles 2 + FPV Remote Controller 2 (The flight controller needs to be configured with the SBUS protocol. For specific product compatibility information, please contact DJI customer service or refer to the DJI website).